Open a larger view
Bearing specifications
TIMKEN 6006-Z-NR-C3 Deep Groove Ball Bearing
- HCT SKU
- HCT-052498
- Brand
- TIMKEN
- Configuration
- Shield · Increased clearance (C3)
- Bore (d) 30 mm
- Outside (D) 55 mm
- Width (B) 13 mm
- Dynamic load (C) 13.2 kN
pcs
Overview
TIMKEN 6006-Z-NR-C3 deep groove ball bearing. 30 mm bore, 55 mm outside diameter, 13 mm width. Shielded, C3 clearance. Request a quote from HCT Bearings today.
Bearing designation
How 6006-Z-NR-C3 is put together: 3 verified elements.
- 6006 Basic designation Single row deep groove ball bearing 60 series, 30 mm bore.
- - NR Snap ring Snap ring groove with snap ring Snap ring groove in the outer ring, supplied with a snap ring. Applies to Timken deep groove ball bearings only.
- - C3 Clearance Loose clearance Radial internal clearance looser than Normal (C3). Applies to Timken metric deep groove ball bearings in the 6000, 6200, 6300, 6400 and thin-section series.
Not defined from an official source:
Z
Product information
Units
Dimensions and mass
| Bore diameter (d) | 30 mm |
|---|---|
| Outer diameter (D) | 55 mm |
| Width (B) | 13 mm |
Basic load ratings
| Dynamic load rating (C) | 13.2 kN |
|---|---|
| Static load rating (C0) | 8.28 kN |
Design and properties
- Seal / Shield
- Shield
- Internal Clearance
- Increased clearance (C3) greater than normal
- Cage
- Steel cage
- Material
- Bearing steel
Converted values are shown for convenience only. The metric figures are the published data.
Specifications are provided for product selection and may vary by configuration. Please contact us for confirmation before ordering.
