Open a larger view
Bearing specifications
SKF 6011-ZNR/C3 Deep Groove Ball Bearing
- HCT SKU
- HCT-005016
- Brand
- SKF
- Series
- 6000 Series
- Configuration
- Single row · Metal shield, one side · Increased clearance (C3)
- Bore (d) 55 mm
- Outside (D) 90 mm
- Width (B) 18 mm
- Dynamic load (C) 29.6 kN
pcs
Overview
SKF 6011-ZNR/C3 deep groove ball bearing. 55 mm bore, 90 mm outside diameter, 18 mm width. Shielded, C3 clearance. Request a quote from HCT Bearings today.
Bearing designation
How 6011-ZNR/C3 is put together: 4 verified elements.
- 6011 Basic designation Single row deep groove ball bearing 60 series, 55 mm bore.
- - Z Seal / shield Shield, one side Stamped steel shield on one side.
- NR Snap ring Snap ring groove with snap ring Snap ring groove in the outer ring, supplied with a snap ring.
- / C3 Clearance Clearance greater than Normal Radial internal clearance greater than Normal.
Product information
Units
Dimensions and mass
| Bore diameter (d) | 55 mm |
|---|---|
| Outer diameter (D) | 90 mm |
| Width (B) | 18 mm |
Basic load ratings
| Dynamic load rating (C) | 29.6 kN |
|---|---|
| Static load rating (C0) | 21.2 kN |
Speeds
| Reference speed | 16 000 r/min |
|---|---|
| Limiting speed | 10 000 r/min |
Design and properties
- Seal / Shield
- Metal shield, one side
- Internal Clearance
- Increased clearance (C3) greater than normal
- Cage
- Sheet metal cage
- Rows
- Single row
- Material
- Bearing steel
Converted values are shown for convenience only. The metric figures are the published data.
Specifications are provided for product selection and may vary by configuration. Please contact us for confirmation before ordering.
